76 Chapter 6 Application Of INTELLISLOT
1. Click Start-> Programs -> Accessories -> Communications -> HyperTerminal to start the HyperTerminal, as
shown in Figure 6-5.
tt
Figure 6-5 Typing the name
2. Type the name ‘tt’ in the Name field, and click OK, as shown in Figure 6-6.
tt
Figure 6-6 Choosing serial port
3. In the Connect To interface, choose the serial port being used (such as ‘COM1’), and click OK, as shown in Figure
6-7.
Figure 6-7 Setting port property
4. Set the communication parameters as shown in Figure 6-7 and click OK.
Liebert.PEX2 Series Air Conditioner User Manual
To Next Page
Loading...
