Emerson Micro Motion 1700 - PROFIBUS-PA Wiring

10.2 PROFIBUS-PA wiring
See the following wiring diagram, and refer to the PROFIBUS-PA User and Installation
Guideline published by PNO.
Important
• The transmitter is FISCO approved.
• For intrinsically safe wiring, see the PROFIBUS-PA User and Installation Guideline.
PROFIBUS-PA wiring diagramFigure 10-2:
A
B
D
C
E
A. Bus power supply
B. PROFIBUS-PA segment per PROFIBUS-PA User and Installation Guideline
C. Spur to PROFIBUS-PA segment per PROFIBUS-PA User and Installation Guideline
D. Terminals 1 and 2
E. Terminals 3 – 6 (unused)
Note
The PROFIBUS communication terminals (1 and 2) are not polarity-sensitive.
I/O wiring for Model 2700 transmitters with Foundation fieldbus or PROFIBUS-PA
104 Micro Motion
®
Model 1700 and 2700