Emerson Micro Motion 1700 - Page 74

c. Ensure integrity of gaskets, grease all O-rings, then replace the junction box
cover and remote core processor end-cap and tighten all screws, as required.
5.7.1 Sensor and remote core processor terminals
All ELITE, H-Series, and T-Series sensor, and 2005 or newer F-Series
sensor terminals
Figure 5-22:
D
I
H
F
E
A
B
C
G
A. Violet
B. Yellow
C. Orange
D. Brown
E. White
F. Green
G. Red
H. Gray
I. Blue
All Model D and Model DL, and pre-2005 F-Series sensor terminalsFigure 5-23:
Mounting and sensor wiring for remote core processor with remote sensor installations
70 Micro Motion
®
Model 1700 and 2700