Emerson Micro Motion

Figure 1-1: EtherNet/IP Module with a Model 2700 transmitter
A. PLC
B. Ethernet
C. EtherNet/IP Module
D. Modbus/RS-485
E. Transmitter (see Product Data Sheet for compatible transmitters)
F. To sensor
G. PC with Micro Motion Ethernet Config Tool
H. Configuration loop (with configuration cable)
I. Other devices (SCADA, PC, Inverter)
J. Web browser
Figure 1-2: EtherNet/IP Module in an MVD Direct Connect installation
A. PLC
B. Ethernet
C. EtherNet/IP Module
D. Modbus/RS-485
E. Barrier
F. Core processor
G. To sensor
H. PC with Micro Motion Ethernet Config Tool
I. Configuration loop (with configuration cable)
J. Other devices (SCADA, PC, Inverter)
K. Web browser
Before you begin
User Guide
January 2019 MMI-20019808
6 Micro Motion EtherNet/IP Module