System Application Guide SAG582127000
Spec. No. 582127000 (Model 721
NPBB) Issue AF, February 26, 2014
Page 11 of 125
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
LIST DESCRIPTIONS (582127000)
List Numbers (582127000)
List 1: Main Bay Common Equipment (Power and Distribution)
Features
♦ Provides common equipment for one “power and distribution” bay rated for up to 2000 amperes of
distribution.
♦ Accepts one (1) distribution cabinet (options are 1-row, 2-row, 3-row, or 4-row cabinet).
♦ Accepts one (1) ACU+ Controller.
♦ Includes the IB2 ACU+ interface board.
♦ Accepts up to six (6) module mounting shelves Spec. No. 588705000 (including expansion shelves).
or
Accepts up to six (6) module mounting shelves Spec. No. 588705300 (including expansion shelves).
Restrictions
When the system is equipped with a List 40, 41, 42, 45, 46, or 47 front access Input Termination Assembly,
refer to the restrictions under these list descriptions.
Ordering Notes
1) Order a relay rack or shipping brackets per “Relay Racks and Shipping Brackets” under ACCESSORY
DESCRIPTIONS. If required, order relay rack transition plates per “Transition Plates to Mount Relay
Rack on Top of GNB Absolyte IIP Batteries” under ACCESSORY DESCRIPTIONS.
2) Order one (1) List 21, 22, 23, or 24 distribution cabinet.
a) Order up to four (4) (per the capacity of the distribution cabinet ordered) distribution panels, battery
disconnect panels, and/or return bar panel as required per “Single Voltage Distribution Panel”, “Dual
Voltage Distribution Panel”, “Battery Disconnect Distribution Panel”, and “Return Bar Panel” under
LIST DESCRIPTIONS.
b) Order battery disconnect contactors and low voltage disconnect options as required per “Battery
Disconnect Contactors” and “Low Voltage Disconnect Options” under LIST DESCRIPTIONS.
c) Order one (1) ACU+ controller, P/N 1M820DNA.
d) Order fuses and/or circuit breakers as required per “Distribution Devices” under ACCESSORY
DESCRIPTIONS.
e) Order input and load distribution lugs, lug adapters, and lug hardware kits as required per “Wiring
Notes” under ACCESSORY DESCRIPTIONS.
f) Order a distribution cabinet top shield as required per List 29.
g) Order a battery shunt as required per List 90, 91, or 92.
3) 588705000 Rectifier Option: Order interface components for module mounting shelf(s) Spec. No.
588705000 as required per List 30. Order field expansion module mounting shelf(s) per List 31. Order
module mounting shelf(s) per PD588705000 (choices are 58870500021, 58870500022, 58870500031,
58870500032).
a) Order the front access AC Input Termination Assembly per List 40, 41, or 42 if module mounting shelf
58870500021 ordered (or order module mounting shelves with AC line cords or terminal blocks,
58870500022, 58870500031, 58870500032).
b) Order rectifier modules as required, P/N 1R483500E, 1R483200E, or 1R483200.
c) Order a module mounting position blank cover panel, P/N 21140440, for each empty module
mounting position in the system, as desired.
4) 588705000 Converter Option: Order interface components for module mounting shelf(s) Spec. No.
588705000 as required per List 34. Order field expansion module mounting shelf(s) per List 35. Order
module mounting shelf(s) per PD588705000 (choices are 58870500040, 58870500041, 58870500042).
To Next Page
Loading...
