System Application Guide SAG582127000
Spec. No. 582127000 (Model 721
NPBB) Issue AF, February 26, 2014
Page 19 of 125
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
4) Order battery contactor, battery shunt, and low voltage disconnect options as required.
List 22: Two-Row Distribution Cabinet
Features
♦ Accepts up to two (2) total distribution panels, battery disconnect
distribution panels, and/or return bar panel.
♦ Rated for up to 1200 amperes of distribution.
Restrictions
For use in List 1, List 5, and List 6.
Cannot be ordered with List 1 if it is to be used with a List 2.
Not available for List 2 and List 3 bays (no interbay busbar landings available).
Ordering Notes
1) Order up to two (2) distribution panels as required per “Single Voltage Distribution Panel”, “Dual Voltage
Distribution Panel”, “Battery Disconnect Distribution Panel”, and “Return Bar Panel” under LIST
DESCRIPTIONS.
2) Order fuses and/or circuit breakers as required per “Distribution Devices” under ACCESSORY
DESCRIPTIONS.
3) Order input and load distribution lugs, lug adapters, and lug hardware kits as required per “Wiring Notes”
under ACCESSORY DESCRIPTIONS.
4) Order battery contactor, battery shunt, and low voltage disconnect options as required.
List 23: Three-Row Distribution Cabinet
Features
♦ Accepts up to three (3) total distribution panels, battery disconnect
distribution panels, and/or return bar panel.
♦ Rated for up to 1800 amperes of distribution.
Restrictions
For use in List 1, List 2, List 3, List 5, and List 6.
Ordering Notes
1) Order up to three (3) distribution panels as required per “Single Voltage
Distribution Panel”, “Dual Voltage Distribution Panel”, “Battery Disconnect
Distribution Panel”, and “Return Bar Panel” under LIST DESCRIPTIONS.
2) Order fuses and/or circuit breakers as required per “Distribution Devices”
under ACCESSORY DESCRIPTIONS.
3) Order input and load distribution lugs, lug adapters, and lug hardware kits as required per “Wiring Notes”
under ACCESSORY DESCRIPTIONS.
4) Order battery contactor, battery shunt, and low voltage disconnect options as required.
To Next Page
Loading...
