SAG582127000 System Application Guide
Issue AF, February 26, 2014 Spec. No. 582127000 (Model 721
NPBB)
Page 56 of 125
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Relay Racks and Shipping Brackets
Features
♦ The system is factory mounted to the relay rack or shipping brackets specified when ordered.
♦ Relay racks (except P/N 541340) are 23” standard mounting with 3” deep uprights.
P/N 541340 is 23” standard mounting with 6” deep upright.
♦ When ordered with shipping brackets, the system is mounted on shipping brackets bolted to a shipping
skid. The shipping brackets can mount a system up to 22U high.
Ordering Notes
1) Order from relay racks and shipping brackets listed in Table 2.
Part
Number
Size
Available Mounting
Positions (1RU = 1-3/4”)
Notes
509638
509639
Shipping Brackets 22RU --
21.625”H x 24.376”W x 15”D
25.656”H x 24.376”W x 15”D
543152 27.406”H x 24.376”W x 15”D 14RU Seismic (Notes 1 and 2)
543153 36.156”H x 24.376”W x 15”D 19RU Seismic (Notes 1 and 2)
39.656”H x 24.376”W x 15”D
43.156”H x 24.376”W x 15”D
543156 51.906”H x 24.376”W x 15”D 28RU Welded
543157 71.156”H x 24.376”W x 15”D 39RU Welded
72.000”H x 24.375”W x 15”D
84.000”H x 24.375”W x 15”D
541340 84.000”H x 25.800”W x 18”D 45RU Seismic (Notes 1 and 2)
547862 85.750”H x 24.375”W x 15”D 46RU Welded
90.000”H x 24.375”W x 15”D
96.000”H x 24.375”W x 15”D
Note 1: Complies with Bellcore Seismic Zone 4 requirements.
Note 2: Seismic (Zone 4) compliant ONLY when system DOES NOT contain any of the
following components: List 93 Battery Tray.
Table 2
Available Relay Racks and Shipping Brackets
To Next Page
Loading...
