System Application Guide SAG582127000
Spec. No. 582127000 (Model 721
NPBB) Issue AF, February 26, 2014
Page 35 of 125
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
List AJ: -48V Distribution Panel,
(4) TPL-B Fuse Positions (without Shunts) (without Return Busbar)
Features
♦ (4) -48V Distribution Fuse Mounting Positions:
70A to 250A TPL-B Type Fuses.
♦ Does NOT include Shunts.
♦ Does NOT include a Return Busbar.
♦ 600A Maximum Capacity.
Restrictions
Can be installed in any row 1-4 of a 1-, 2-, 3-, or 4-row distribution cabinet.
Maximum lug width, 1.50 inches.
Ordering Notes
1) Specify row for panel location(s).
2) Order low voltage load disconnect List LL per panel as required.
3) To terminate load returns within the distribution cabinet, order List GA as required.
4) Order fuses as required per Table 16. Order replacement alarm fuses (18/100A) per Table 17.
5) Order load lugs (two hole, 3/8” bolt clearance hole, 1” centers) as required for each distribution position
per Table 28.
6) Order lug hardware kit (P/N 548185) as required. Lug hardware kit provides sixteen (16) sets of 3/8-16
hardware (nuts, flat washers, and lock washers), enough for eight (8) lug landing points.
Loa
d
Conn
ect
ions
LOAD
CON
NEC
TIONS
3/8
-16 S
tud
s on 1” Centers
(Cus
tom
er must supply or order addition
al h
ardw
are)
Max
imum Lug Width: 1.5 inches.
To Next Page
Loading...
