System Application Guide SAG582127000
Spec. No. 582127000 (Model 721
NPBB) Issue AF, February 26, 2014
Page 71 of 125
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Optional Bullet Nose Type 6-Position GMT Distribution Fuse Block, P/N 550224,
(6) GMT Fuse Positions
Features
♦ Provides six (6) load distribution fuse positions
(1/4A to 15A GMT alarm-type fuses).
♦ Single voltage distribution (-48V or +24V).
♦ Mounts in two (2) distribution positions of any “bullet nose” distribution panel.
♦ Screw clamp type load and load return terminals provided.
♦ Includes six (6) dummy fuses equipped with safety fuse covers.
Restrictions
Can be used in a List AA, AB, DA, DB, DC, and DD distribution panel only.
Occupies two (2) bullet device mounting positions.
Can only be installed in the 1-2, 3-4, 17-18, 19-20, 21-22, and 23-24 positions of the
distribution panel.
Terminal block wire size capacity: 24 to 14 AWG.
35A maximum capacity per block.
Maximum GMT fuse size is 15A.
Ordering Notes
1) Order optional Bullet Nose Type 6-Position GMT Fuse Block (P/N 550224) as required.
2) Order fuses as required per Table 13.
To Next Page
Loading...
