SAG582127000 System Application Guide
Issue AF, February 26, 2014 Spec. No. 582127000 (Model 721
NPBB)
Page 16 of 125
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Restrictions
When the system is equipped with a List 40, 41, 42, 45, 46, or 47 front access Input Termination
Assembly, refer to the restrictions under these list descriptions.
Will not accept List 60 converter interface components.
Will not accept dual voltage distribution panels.
Order maximum of one (1) List 2 or List 5 per Power System.
Cannot be used when List 2 is ordered. Order List 2 or List 5, not both.
Interbay power cabling is not included, and must be separately provided per site requirements.
If low voltage disconnect (List LL or List LB) is to be included, the Main Bay (List 1) of the system must also
have low voltage disconnect (List LL or List LB).
Ordering Notes
1) Order a relay rack or shipping brackets per “Relay Racks and Shipping Brackets” under ACCESSORY
DESCRIPTIONS. If required, order relay rack transition plates per “Transition Plates to Mount Relay
Rack on Top of GNB Absolyte IIP Batteries” under ACCESSORY DESCRIPTIONS.
2) Order one (1) List 21, 22, 23, or 24 distribution cabinet.
a) Order up to four (4) (per the capacity of the distribution cabinet ordered) distribution panels, battery
disconnect panels, and/or return bar panel as required per “Single Voltage Distribution Panel”,
“Battery Disconnect Distribution Panel”, and “Return Bar Panel” under LIST DESCRIPTIONS.
b) Order battery disconnect contactors and low voltage disconnect options as required per “Battery
Disconnect Contactors” and “Low Voltage Disconnect Options” under LIST DESCRIPTIONS.
c) Order fuses and/or circuit breakers as required per “Distribution Devices” under ACCESSORY
DESCRIPTIONS.
d) Order input and load distribution lugs, lug adapters, and lug hardware kits as required per “Wiring
Notes” under ACCESSORY DESCRIPTIONS.
e) Order a distribution cabinet top shield as required per List 29.
f) If distribution only, order a bottom rear distribution cabinet cover per List 4.
g) Order a battery shunt as required per List 90, 91, or 92.
3) 588705000 Rectifier Option: Order interface components for module mounting shelf(s) Spec. No.
588705000 as required per List 30. Order field expansion module mounting shelf(s) per List 31. Order
module mounting shelf(s) per PD588705000 (choices are 58870500021, 58870500022, 58870500031,
58870500032).
a) Order the front access AC Input Termination Assembly per List 40, 41, or 42 if module mounting shelf
58870500021 ordered (or order module mounting shelves with AC line cords or terminal blocks,
58870500022, 58870500031, 58870500032).
b) Order rectifier modules as required, P/N 1R483500E, 1R483200E, or 1R483200.
c) Order a module mounting position blank cover panel, P/N 21140440, for each empty module
mounting position in the system, as desired.
4) 588705000 Converter Option: Order interface components for module mounting shelf(s) Spec. No.
588705000 as required per List 34. Order field expansion module mounting shelf(s) per List 35. Order
module mounting shelf(s) per PD588705000 (choices are 58870500040, 58870500041, 58870500042).
a) Order the front access DC Input Termination Assembly per List 45, 46, or 47 if module mounting shelf
58870500040 ordered (or order module mounting shelves with terminal blocks, 58870500041,
58870500042).
b) Order converter modules as required, P/N 1C400483500E.
c) Order a module mounting position blank cover panel, P/N 21140440, for each empty module
mounting position in the system, as desired.
5) 588705300 Rectifier/Converter Option: Order interface components for module mounting shelf(s) Spec.
No. 588705300 as required per List 32. Order field expansion module mounting shelf(s) per List 33.
Order module mounting shelf(s) per PD588705300.
To Next Page
Loading...
