Instruction Manual
748275-F
September 2003
P-2 Preface Rosemount Analytical Inc. A Division of Emerson Process Management
Model NGA2000 I/O Modules
SAFETY SUMMARY
If this equipment is used in a manner not specified in these instructions, protective systems may be
impaired.
DANGER.
ELECTRICAL SHOCK HAZARD
Operate this equipment only when covers are secured. Servicing requires access to live parts
which can cause death or serious injury. Refer servicing to qualified personnel. For safety and
proper performance, this module must be connected to a properly grounded three-wire source of
electrical power.
NOTICE
Software compatibility is necessary for all NGA2000 components in your system to work together.
The version of your Platform's software must be equal to or greater that the version of any other
module(s) for successful compatibility. If it is not, contact Rosemount Analytical at 800-441-7245 to
order software upgrade kit PN 657150 for the Platform.
You can locate the version of each NGA2000 component as follows:
Platform Controller Board
Turn power ON.
The display will show "Control Module V2. ...". This is the software version.
Analyzer Module
Located on the right side of the Analyzer Module case.
I/O Module
Located on the backplane connector of the module. If no label is present, the module is Version
2.0.
To Next Page
Loading...
