Quick Panel Operator User Manual Section 3
GFK-2847AA Jan 2023
Software 40
Note: The list of all HMI tags is populated within the hmiTags node of MIB tree and the HMI Tag access
level is currently restricted to Read-only for the SNMP Manager.
OID for starting HMI Tag element (also called Index element):
.1.3.6.1.4.1.24893.1.5.2.1.1.50.1.1.
If there were 40 HMI tags in total, the last OID would be
.1.3.6.1.4.1.24893.1.5.2.1.1.50.1.40.
Figure 39: List of HMI Tags Available to Query
The following sections provide the procedures to enable and configure
the QuickPanel
+
device to operate as an SNMP Agent and establish
communication with an SNMP Manager.
•
Section 3.14.1, Configure Trap Destinations
•
Section 3.14.2, Enable or Disable SNMP Agent
•
Section 3.14.3, Export MIB to SD Card
•
Section 0,
•
Load MIB into SNMP Manager
•
Section 3.14.5, Data Types Mapping between PAC Machine Edition
Project and SNMP
To Next Page
Loading...
Need help?
General
