Your instrument purchase from Emerson is one of the finest available for your particular application. These instruments
h
ave been designed, and tested to meet many national and international standards. Experience indicates that its perform-
ance is directly related to the quality of the installation and knowledge of the user in operating and maintaining the instru-
ment. To ensure their continued operation to the design specifications, personnel should read this manual thoroughly
before proceeding with installation, commissioning, operation, and maintenance of this instrument. If this equipment is
used in a manner not specified by the manufacturer, the protection provided by it against hazards august be impaired.
• Failure to follow the proper instructions august cause any one of the following situations to occur: Loss of life; per-
sonal injury; property damage; damage to this instrument; and warranty invalidation.
• Ensure that you have received the correct model and options from your purchase order. Verify that this manual cov-
ers your model and options. If not, call 1-800-854-8257 or 949-757-8500 to request correct manual.
• For clarification of instructions, contact your Rosemount representative.
• Follow all warnings, cautions, and instructions marked on and supplied with the product.
• Use only qualified personnel to install, operate, update, program and maintain the product.
• Educate your personnel in the proper installation, operation, and maintenance of the product.
• Install equipment as specified in the Installation section of this manual. Follow appropriate local and national codes.
Only connect the product to electrical sources specified in this manual.
• Use only factory documented components for repair. Tampering or unauthorized substitution of parts and proce-
dures can affect the performance and cause unsafe operation of your process.
• All instrument enclosures must be closed and protective covers must be in place unless qualified personnel are per-
forming maintenance.
WARNING
RIS
K
OF
EL
EC
TRIC
AL
S
HO
C
K
Equipme
nt pr
o
t
ec
t
ed th
r
o
ugho
ut
by
do
uble
ins
ulation.
•
I
ns
tallation and se
rvicing of th
is
pr
oduc
t
a
ugus
t
ex
pose pe
rsonne
l to
dange
r
o
us
volt
a
ges
.
•
M
ain powe
r
w
ir
ed to se
p
ar
at
e powe
r so
urce m
us
t be
disconnect
ed befor
e
se
rvicing.
•
Do no
t
o
pe
r
at
e or e
ne
rgi
z
e ins
trume
nt w
ith c
a
se
o
pe
n!
•
Si
gnal w
iring connec
t
ed in th
is
box
m
us
t be r
at
ed
at lea
s
t 2
4
0
V
for
Eur
o
pean m
ains
o
pe
r
ation.
•
Non-
met
allic
c
a
ble
s
tr
ain
r
e
liefs
do
no
t
pr
o
vi
de
gr
o
unding
betwee
n
conduit
connections
!
U
se
gr
o
unding
ty
pe
bus
h
-
ings and jumper wires.
•
Unused ca
ble condu
it en
tries mu
s
t be securely sealed by non-flammable closures to provide enclosure integrity in com
-
plianc
e with pers
onal safety and enviro
nmental protection requirements. Unused conduit openings must be sealed with
Type 4X
or
IP66
condu
it plugs
t
o
main
tain the ingress protection rating (Type 4X)
•
Elect
rical ins
tallat
ion mus
t
be
in
acc
ordance with the National Electrical Code (ANSI/NFPA-70) and/or any other
ap
pli
cable
national or local codes.
•Operate o
n
ly with fron
t pan
el
fastened and in place.
•S
afety
a
nd
p
erformance
re
qui
re
that this instrument be connected and properly grounded through a three-wire power
sou
rc
e
.
•
Proper
u
s
e and
con
f
igu
rati
o
n
is the
responsibility of the user.
Essential Instructions
Read this page before proceeding
To Next Page
Loading...
