Need help?Do you have a question about the Emerson Rosemount 8700M and is the answer not in the manual?
General| Brand | Emerson |
|---|---|
| Model | Rosemount 8700M |
| Category | Measuring Instruments |
| Language | English |
Configure transmitter options and identify application requirements.
Set user-selectable hardware switches for power and security features.
National, local, and plant electrical requirements for installation.
Avoid extreme temperatures and vibration for optimal transmitter life.
Proper PPE usage and care to prevent damage during handling.
Install sensor with specific straight pipe diameters for accuracy.
Mount sensor to ensure the arrow points in the direction of flow.
Install sensor where it remains full during operation for accurate readings.
Orient electrodes correctly in the 3 and 9 o'clock positions.
Select compatible gasket material and ensure proper placement.
Follow specific tightening sequences and torque values for flange connections.
Ensure gasket compatibility and proper placement for wafer sensors.
Use alignment spacers for proper centering of wafer sensors.
Torque specifications for Rosemount 8711 wafer sensors.
Comply with electrical codes for conduit connections and sealing.
Follow guidelines for conduit runs and cable bundling to prevent interference.
Connect integral and remote mount transmitters to sensors.
Use shielded twisted pair cables with length limitations.
Proper wire preparation to avoid shorts, noise, and unstable readings.
Connect wires to the transmitter's terminal block for various functions.
RS-485 cable recommendations for Modbus RTU signal.
Connect AC or DC power supply according to requirements.
Navigate the menu structure using the device's operator interface.
Configure the transmitter's address for the Modbus network.
Set the order for transmitting floating-point information.
Set the communication speed for the transmitter.
Configure error-checking methodology for data transmission.
Set the number of stop bits in the data packet.
Assign a tag for identifying and distinguishing transmitters.
Specify the format for displaying flow rate units.
Set the transmitter to match the connected sensor's line size.
Enter the unique sensor calibration number generated at the factory.
Understand the meaning of various product certification symbols.
Information regarding EMC, LVD, and PED directives compliance.
Details on FM, ATEX, IECEx, INMETRO, NEPSI, KCS certifications.
Schedule detailing conformity with EMC, LVD, and PED directives.
Specific ATEX directive information and notified body details.
Overview of equipment markings for ATEX/IEC Ex hazardous locations.
List of essential documents for ATEX/IEC Ex installations.
List of supporting documents for ATEX/IEC Ex approvals.
Breakdown of transmitter model nomenclature and electrical parameters.
Breakdown of Model 8705-M flow tube nomenclature and electrical data.
Breakdown of Model 8711-M/L flow tube nomenclature and electrical data.
Contact information for the North America regional office.
Contact information for the Latin America regional office.
Contact information for the Europe regional office.
Contact information for the Asia Pacific regional office.
Contact information for the Middle East and Africa regional office.
To Next Page