Emerson Rosemount OCX 8800 - Certifications; Electrical Noise; Line Voltage; Pollution Degree

1.3.16 Certifications
Complies with the following standards:
• 22.2 No. 94-M91; 22.2 No. 60529:05; ANSI/ISA S82.02.01; ANSI/ISA 12.00.01:2002;
ANSI/ISA 12.22.01:2002;UL No. 50 (Ed 10); CAN/CSA C22.2 No. 61010-1-12;
CAN/CSA C22.2 No. 60079-0:15; CAN/CSA C22.2 No. 60079-1:16; ISA 60079-0
(12.00.01) – 2013; ISA 60079-0 (12.00.01) – 2013; ISA 60079-1 (12.22.01) – 2009
(R2013) ISA 61010-1-12
• ATEX: En 60079-0 : 2011 + A11 : 2013, EN 60079-1 : 2014, IEC 60079-0 : 2017
Special conditions of use:
- Flame proof joints are not intended to be repaired.
- Avoid installations that could cause electrostatic build-up on the painted
surfaces, and only clean the painted surfaces with a damp cloth.
• IECEx: IEC 60079-0: 2004, Edition 4; IEC 60079-1: 2014, Edition 7.0
• FM: Class 3600:1998; Class 3810:2005; ANSI/ISA 12.00.01:2005; ANSI/ISA
12.22.01:2002; ANSI/ NEMA 250:1991; ANSI/ISA 60529:2004
1.3.17
Electrical noise
Meets EN 61326, Class A
1.3.18
Line voltage
Universal 100 to 240 Vac ± 10%, 50 to 60 Hz, no switches or jumpers required, 3/4-14 NPT
conduit port
1.3.19
Pollution degree
2
1.3.20
Over voltage category
II
Description and specifications
14 OCX 8800