Emerson Rosemount OCX 8800 - Page 43

Pneumatic Installation, OCX with Reference Air Set (without
Autocalibration)
Figure 2-7:
A. Flowmeter
B. Combination filter - reg.
C. 2 in. pressure gauge
D. Flowmeter
Mounting FlangeTable 2-4:
A Flowmeter 1-10 scfh 771B635H01
B Combination filter-
reg.
0-60 psig 1A994422H01
C 2 in. pressure gauge 0-60 psig 275431-03
D Flowmeter 0.05 - 0.5 scfh 771b635H08
2. Connect the dilution air flow meter output to the dilution air inlet fitting on the
sensor housing.
Install
Reference Manual 33