Safety
Information
Introduction
Product
information
System
design
Mechanical
installation
Electrical
installation
Getting
started
Optimisation Parameters
Technical
data
Component
sizing
Diagnostics
Unidrive SP Regen Installation Guide 23
Issue Number: 2 www.controltechniques.com
3.8 Options
Figure 3-11 Options available for Unidrive SP Regen
* A SMARTCARD is provided with the Unidrive SP as standard. Only one SMARTCARD can be fitted at any one time.
Position feedback modules will still function with a drive configured in regen mode, however, this would only be required where the Regen drive is to
be used to provide additional Solutions Module slots for the motoring drive.
Keypad
Automation Fieldbus
SMARTCARD*
CT Comms
cable
External
footprint /
bookcase
EMC filter
NOTE
To Next Page
Loading...