5.5.4 Scheduling
The EM6260 provides the scheduling function for the motion detection triggered
email/ftp sending and/or the NAS recording with the individual parameters set in the .
“Email/ftp alarm” settings and the “NAS settings” page. Totally 12 schedule list items
are allowed. There is no conflict check for the scheduling, it means that the scheduling
time could be overlapped, and the EM6260 will do all the scheduled events during the
overlapped time period. For the scheduling of the Email/ftp sending and/or NAS
recording, the “Schedule” option must enabled in the “Email/ftp alarm” settings and/or
the “NAS settings”.
1. Schedule list – all the scheduling are listed in this area. Each listed item can be
modified or deleted by pressing the “Edit” or “Delete” button.
2. Email/ftp Alarm – for each scheduling, if this is selected and the “Motion triggered”
is enabled, the EM6260 will trigger the email/ftp sending in the scheduled time
period when video motion is detected.
3. NAS Record – for each scheduling, if this is selected, either “Continuous” or
“Motion triggered” could be enabled. For “Continuous”, it means that EM6260 will
do the video recording to the NAS device during the whole scheduled period. For
“Motion triggered”, it means that the EM6260 will do the video recording to the
NAS device for 30 seconds during the scheduled period each time when video
motion is detected. There is a five seconds pre-recording (only available when
SD-Card is installed) of the triggered recording to keep the critical moment
recorded.
4. SD-Card Record – for each scheduling, if this is selected, either “Continuous” or
“Motion triggered” could be enabled. For “Continuous”, it means that the EM6260
will do the video recording to the SD-Card during the whole scheduled period. For
To Next Page
