EAOM-6 Automatic Generator Start Controller with Metering, 96x96 DIN Size
- Automatic engine start / stop
- Automatic shutdown on fault condition
- LED status and fault indication
- Alternator voltages and frequency measurement and monitoring
- Battery voltage measurement and monitoring
- Simple push-button controlled operation
- Over / under speed warning and shutdown
- Remote start / stop input
- Three user configurable inputs
- Provides charge alternator excitation current
- Two configurable relay outputs
- Speed sensing from alternator frequency or magnetic pickup
- Preheat feature
- Fully programmable
- RS-232 communication port
- Standard modem communication
-
Alternator voltages and frequency Battery voltage
Battery charging Engine running time
Engine RPM Engine Power
-
Engine fuel supply or engine stopping Preheat
Starter motor Alarm horn
Over / Under speed
-
Engine temperature Charging alternator
Oil pressure Emergency stop
Over / Under speed Low battery voltage
Voltage fail Weak battery alarm
Monitors
Controls
Fail Monitoring
Instruction Manual. ENG EAOM-6 02 V00 07/07
EAOM-6
Automatic Generator Start
Controller with Metering,
96x96 DIN Size
EAOM-6 SOFT
PC Communication Software for
Programming and Remote Monitoring
To Next Page
Need help?
General
