EMKO EAOM-6 User Manual

2
Instruction manual of EAOM-6 consists of two main sections. Explanation of these
sections are below. Also, there is another section which include technical specifications of the
device. All titles and page numbers in instruction manual are in “CONTENTS” section. User can
reach to any title with section number.
Installation:
In this section, physical dimensions of the device, panel mounting, electrical wiring,
physical and electrical installation of the device to the system are explained.
Operation and Parameters:
In this section, user interface of the device, how to access to the parameters, description
of the parameters are explained.
Also in these sections, there are warnings to prevent serious injury while doing the
physical and electrical mounting or using the device.
Explanation of the symbols which are used in these sections are given below.
This symbol is used to determine the dangerous situations as a result of an electric
shock. User must pay attention to these warnings definitely.
a
c
This symbol is used for safety warnings. User must pay attention to these
warnings.
This symbol is used to determine the important notes about functions and usage of
the device.
ABOUT INSTRUCTION MANUAL
i
This symbol is used for VDC
This symbol is used for VAC
Z
V

EMKO EAOM-6 Specifications

General

Brand	EMKO
Model	EAOM-6
Category	Controller
Language	English