GBGB
21
5. FIRST START-UP
c. Select the input used for each electrical
power.
The column on the left shows the electrical powers that can be
measured, while the top row shows the available inputs:
Pliers
of the Febos-Energy
Energy meter pulse counter
Febos-Energy
HP SMART/MT
*
Power exchange if TAE2 configured, otherwise power consumed by the residence
Power consumed by the socket
Power consumed by Eco Hot Water
Power produced by the photovoltaic
Power consumed by MIRAI-SMI
* SMART-MT input configuration is linked
to the system recipe
NOTE: If an electrical power is not managed (e.g. photovoltaic not
installed) press its icon (e.g. “
") to deselect it.
To Next Page
Loading...
Need help?
General
