GBGB
20
5. FIRST START-UP
5.5 Setting inputs
of the electrical powers
For the correct measurement of electrical powers
it is essential to associate to each power, the relative
input.
a. Press the icon
then
e. Press to unload to the
SMART-MT the Recipe parameters.
Confirm with Ok
And wait for the procedure to complete
Upon completion of the procedure, the Recipe on the SMART-MT
will correspond to the Recipe loaded from the database.
f. Pressing on a parameter it is possible to modify its value
manually.
b. Press
To Next Page
Loading...
Need help?
General
