67
GBGB
7. INFRARED REMOTE CONTROL
7.3 Cooling functioning COOL
Press the MODE key to select the functioning COOL
With buttons
TEMP, set the desired temperature in
the room (16÷30°C). The temperature can be set from one degree to the next
one.
Press Button
FAN SPEED select the desired speed fan:
Note: The speed also varies in relation to the set temperature.
The air conditioner automatically modulates the compressor frequency to
maintain the set temperature.
If the air conditioner remains operative for long periods of time, with high
humidity levels, it can show condensation drops on the surface.
Anti-freezing protection
In the event anti-freezing protection of the indoor unit heat exchanger
intervenes, the outdoor unit stops, while the fan of the indoor unit
continues to turn according to the set speed.
Automatic
High Average
Low
7.4 Heating functioning HEAT
Press the MODE key to select
functioning HEAT
With buttons TEMP set the desired temperature in
the room (16 ÷ 30 ° C). The temperature can be set to grade..
Press Button
FAN SPEED select the desired speed fan:
High Average
Note: The fan speed varies according to the preset temperature.
Note:
Air conditioner modulate the compressor frequency automatically to
maintain the set temperature.
Anti-cool air protection
Indoor fan functioning depends on the Indoor Unit exchanger tempera-
ture:
- Indoor Unit fan starts working just few minutes after the Outdoor
Unit start-up, when exchanger is warm.
- Indoor Unit fan keeps on functioning for few minutes after the
Outdoor Unit stops, until the exchanger becomes cold.
To Next Page
Loading...
Need help?
General
