The power cable for the Fusion Flex Amplier should be unplugged from the outlet during severe electrical
storms, or when unused for a long period of time.
Only replace the fuse(s) in the Fusion Flex Amplier with fuse(s) of proper value and voltage rating.
The Fusion Flex Amplier should only be cleaned as directed in the Manual. Avoid spraying liquids directly onto
the unit and NEVER spray liquids into the vents. Care should be taken so that small objects do not fall into the
inside of the unit.
You should seek service for your Fusion Flex Amplier by qualied service personnel if any of the following occur:
1. The power-supply cord or the plug has been damaged.
2. Objects or liquid have fallen or spilled into the vents.
3. The unit has been exposed to rain.
4. The unit exhibits a marked change in performance.
5. The unit has been dropped, or its enclosure or chassis is damaged.
NOTE: TO COMPLETELY DISCONNECT THE FUSION FLEX AMPLIFIER FROM THE AC POWER MAINS, DISCONNECT
THE AC POWER CORD FROM THE AC RECEPTACLE.
NOTE: THE POWER CORD ON THE FUSION FLEX AMPLIFIER MUST REMAIN READILY ACCESSIBLE AT ALL TIMES.
!
CAUTION
CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
To Next Page
Loading...
