FB-618/AU – rev.E – ed.2019/08
4. OPTIONAL EQUIPMENT
4.1. PERIOFLOW
®
Nozzles
Single-use nozzle.
Cannot be reprocessed.
DO NOT use the nozzle if the package is damaged or open.
Fully connect the
nozzle by pushing
on a hard surface.
Make sure the nozzle is correctly attached = fully
inserted.
Remove the
nozzle by using
the nozzle
extractor.
Risk of injury: Always USE the nozzle extractor AB-
358/A. DO NOT remove by hands.
4.2. Endochuck & PI Instrument
The Endochuck file holders are available in 90°, 120° or 180° orientations to adapt to particular
configurations.
Do not tighten the chuck nut when no file or instrument is installed as this may damage it.
Verify that the plastic coating is not worn or damaged before use.