EMS FIRECELL - Menu Structure Overview; Device Status Menu; Fault Status Menu; Radio Channels Menu

Menu Structure
Front Screen Text
or
Unassigned Dev
Device Status
Add New Device
Assign Device
Remove Device
Hub/RCC Options
Radio Channels
Advanced
Device Loop /
Address / Status /
Type
Fault Status
Alarm Status *
Battery Level
Signal Level
Manual Update
RCC Number & Ident
Software Version
Set Hub Addr
Add RCC
Remove RCC
Hub / RCC Status
RCC RCC Ch
Device RCC Ch
Individual
All
Change Address
Dev RCC Listing
Global Batt Stat
Global Sig Stat
Individual Test
Start Fast Test
RCC Comms Path
Chg RCC Comm Path
Replace RCC †
Sounder Mode
Call in verify
Analogue 35 mode
Audio Detect
Batt Smoothing
RCC RCC Ch
Device RCC Ch
Assign ALL
Assign RCCs
Currently Used
Manual Select
Auto Select
Fault Status
Signal Level
Manual Update
Background Level
Radio Channels
Ident
Software Version
Refresh RCC
* Alarm Status shown as I/O Status for Input/Output device types.
† Programming features not yet released in this version of software.
Page 16 of 40©2019 EMS Ltd. All rights reserved. MK98 Iss17 05/04/2019 AJM