EMS FIRECELL User Manual

Page 21 of 40
Battery Level; this menu when entered shows information on the selected device’s battery status. The
status of the pack is updated whenever there is a status change or automatically updated every 6 hours.
This is broken down into ve sections.
Front Display Device Status Select Desired Device No Battery Level*
* Each device will show the status of its two battery packs. The battery status information is displayed as
follows;
Pack 1 OK; this indicates a good battery voltage is present in Pack 1. This is represented by displaying a
full battery icon.
Pack 1 Warning; this indicates the battery voltage is low in Pack 1 and is a 30 day warning indication.
The batteries must be changed on the device within 30 days for continued reliable operation. This is
represented by displaying a half full battery icon.
Pack 1 Low; this indicates the battery voltage is low in Pack 1 and is a 7 day warning indication. The
batteries must be changed on the device within 7 days, for continued reliable operation. This is
represented by displaying an empty battery icon.
Pack 1 Missing; this indicates a battery from Pack 1 is missing. The battery must be inserted on the
device for continued reliable operation. This is represented by displaying an X symbol.
Pack 2 OK; this indicates a good battery voltage is present in Pack 2. This is represented by displaying a
full battery icon.
Pack 2 Warning; this indicates the battery voltage is low in Pack 2 and is a 30 day warning indication.
The batteries must be changed on the device within 30 days, for continued reliable operation. This is
represented by displaying a half full battery icon.
Pack 2 Low; this indicates the battery voltage is low in Pack 2 and is a 7 day warning indication. The
batteries must be changed on the device within 7 days for continued reliable operation. This is
represented by displaying an empty battery icon.
Pack 2 Missing; this indicates a battery from Pack 2 is missing. The battery must be inserted on the
device for continued reliable operation. This is represented by displaying an X symbol.
©2019 EMS Ltd. All rights reserved. MK98 Iss17 05/04/2019 AJM

EMS FIRECELL Specifications

General

Frequency	868 MHz
Operating Temperature	-10°C to +55°C
Communication	Wireless
Compliance	EN54-25
Devices Supported	Sounders
Power Supply	Lithium battery
Humidity Range	Up to 95% RH, non-condensing
Compatibility	EMS Firecell System
Type	Wireless Fire Alarm