Page 20 of 40
Alarm Status; when entered, this shows the devices alarm condition information. To view the actual
alarm for a particular device, the rotary control can be pushed to select the device and this will then
display the alarm description.
Front Display Device Status Select Desired Device No Alarm Status*
* The available alarm descriptions are described below;
In Fire; this indicates the device is currently in a re alarm condition.
In Pre Alarm; this indicates the device is currently in a Pre alarm condition.
I/0 Status; this shows the current Input and Output information on Input/Output devices. To view the
status of the inputs and outputs for a particular device, the rotary control can be pushed to select the
device and this will then display the status information description.
Front Display Device Status Select Desired Device No IN: x-x OUT: x-x*
* The available descriptions are shown below;
IN: 0-0; this indicates that input 1 and 2 is in the open (normal) state.
IN: 1-0; this indicates that input 1 is in the closed (activated) state.
IN: 0-1; this indicates that input 2 is in the closed (activated) state.
IN: 1-1; this indicates that input 1 and 2 is in the closed (activated) state.
OUT: 0-0; this indicates that output 1 and 2 is in the open (normal) state.
OUT: 1-0; this indicates that output 1 is in the closed (activated) state.
OUT: 0-1; this indicates that output 2 is in the closed (activated) state.
OUT: 1-1; this indicates that output 1 and 2 is in the closed (activated) state.
©2019 EMS Ltd. All rights reserved. MK98 Iss17 05/04/2019 AJM
To Next Page
Loading...
