EMS FirePoint 5000 Step-By-Step Guide

EMS 5000 FIREPOINT
©2015 EMS Security Group Ltd. All rights reserved. TSD258 Iss 3 25/06/15 AJM
4
1. How To Reset Fire & Fault Events
To reset fires/faults on the 5000 FirePoint, Insert the key into the panel
controls keyswitch, located at the right of the panel. Turn the panel control key
to the on position.
Step Action Screen Display
No
1 This a normal fire event
2 Press the Silence Alarm button and the
screen will now briefly display: (Press Any
Key)
3 Press the Reset/Led Test button and the
screen will now briefly display: (Press
Any Key)
4 The event is now clear, turn the key to the off
position
2. How To Enter The System Event Log
To enter the System event log on the 5000 FirePoint, insert the key into the
panel controls keyswitch, located at the right of the panel.
Step Action Screen Display
No
1 Turn the key to the on position and the screen
will display:
2 Press 0 key and the screen will now display:
3 Press  key two times and the screen will
display:
4 Press Yes key and the screen will now
display:
01 FIRE ALARM TOT 01
RADIO CALLPOINT
ZONE 01 DEVICE005
Alarms Silenced
Push Any Key
Device RESET:
RADIO CALLPOINT
Push Any Key
Status Normal
Date Time
Panel in Access
Date Time
|***Options ****|
>Passwords <
|Time and Date |
Yes =Select Time
|Time and Date |
>Logging <
|Fire System Opts |
YES = Select Time
|**Event Logging *|
>View Log At Date <
|View Entire Log |
Yes = Select Time

EMS FirePoint 5000 Specifications

General

Brand	EMS
Model	FirePoint 5000
Category	Control Panel
Language	English