EMS FirePoint 5000 Step-By-Step Guide

EMS 5000 FIREPOINT
©2015 EMS Security Group Ltd. All rights reserved. TSD258 Iss 3 25/06/15 AJM
7
4. How To Isolate Devices
To isolate a device on the 5000 FirePoint, Insert the key into the panel controls
keyswitch, located at the right of the panel.
Step Action Screen Display
No
1 Turn the key to the on position and the
screen will display:
2 Press 0 key and the screen will now display:
3 Press  key three times and the screen will
display:
4 Press Yes key and the screen will now
display:
5 Press Yes key and the screen will now
display:
6 Press 0 key and the screen will now
display:
7 Enter the device number that you want to
isolate (e.g. 125) then press Yes key and the
screen will now display:
8 Press  key one time and the screen will
display:
9 Press Yes key and the screen will now
display:
10 Press No key three times and the screen will
now display:
|***Options ****|
>Passwords <
|Time and Date |
Yes =Select Time
|Logging |
>Fire System Opts<
|Remote Access |
Yes = select Time
|** Fire system **|
>Dev. Isolate/Test<
| Net. Isolate/Test |
Yes= Select Time
|** Device Status * |
>Number is: 001 <
|Status is: ACTIVE|
Yes= Select Time
Enter Device
(Number 1-256)
Number > _
Yes = Finish Time
Time
|** Device Status * |
>Number is: 125 <
|Status is: ACTIVE|
Yes= Select Time
|Number is: 125 |
>Status is: ACTIVE<
| Zone is : 01 |
Yes= Select Time
|Number is: 125 |
>Status is :ISOLATE<
| Zone is : 01 |
Yes= Select Time
Panel in Access
Date Time
Panel in Access
Date Time

EMS FirePoint 5000 Specifications

General

Brand	EMS
Model	FirePoint 5000
Category	Control Panel
Language	English