11
3.5. INSTALLING THE PEDAL
1. Connect the pedal cord to the corresponding connector
at the rear of the console.
Pay attention to the pedal cord connector indexa-
tion.
Figure 18
2. Make sure that the pedal cord connector is in the
correct position and screw the securing nut.
Figure 19
The pedal can be placed in a protective bag (not
supplied).
3. Make sure that the pedal is in an accessible location
before starting treatment.
3.6. INSTALLING THE STONE CATCHER
Case 1: Use of an in-house aspiration system.
1. Screw the aspiration plug to the handpiece.
Figure 20
2. Connect the in-house aspiration system on the
aspiration plug.
3. Follow the instructions provided for the in-house
aspiration system.
Case 2: Use of a sterile, single-use Stone Catcher
provided by EMS (optional)
1. Screw the sterile connector of the stone catcher into
the handpiece.
Figure 21
To Next Page
Loading...
