7.2. CONSOLE, PEDAL, AND CART
1. Turn off the console.
Figure 72
2. Disconnect the power supply connector before
cleaning.
Figure 73
3. Remove the protective bag from the pedal, if appli-
cable.
4. Plug the cap on the handpiece connector in the front
panel
Figure 74
5. Use a cleaning wipe with proven efcacy (e.g., enzol
2%) to clean the surfaces.
The housing of the console is not waterproof.
6. To disinfect use 70% isopropyl alcohol or other
EPA-recognized surface disinfectant. Be sure to
carefully follow the instructions provided by the disin-
fection solution manufacturer.
To Next Page
Loading...
