Need help?Do you have a question about the Endress+Hauser Cerabar M PMC51? Cerabar M PMP51 and is the answer not in the manual?
General| Type | Cerabar M PMC51 / PMP51 |
|---|---|
| Measuring Principle | Piezoresistive |
| Measured Variable | Pressure |
| Output Signal | 4...20 mA HART, PROFIBUS PA, Foundation Fieldbus |
| Power Supply | 10.5 to 45 V DC (HART), 9 to 32 V DC (PROFIBUS PA, FOUNDATION Fieldbus) |
| Process Temperature | -40 to +85 °C (-40 to +185 °F) |
| Ambient Temperature | -40 to +85 °C (-40 to +185 °F) |
| Housing Material | Aluminum, stainless steel |
| Diaphragm Material | Stainless steel |
| Process Connection | Threaded, flanged, sanitary |
| Protection Class | IP66 |
| Material | Diaphragm: 316L |
| Approvals | ATEX, IECEx, SIL, FM, CSA |
| Communication | HART, PROFIBUS PA, Foundation Fieldbus |
To Next Page