Endress+Hauser Cerabar M PMC51? Cerabar M PMP51 User Manual

Troubleshooting Cerabar M Analog
32 Endress+Hauser
8.6 Return
The measuring device must be returned if repairs or a factory calibration are required, or if the
wrong measuring device has been ordered or delivered. According to legal regulations,
Endress+Hauser, as a ISO-certified company, is required to follow certain procedures when
handling returned products that are in contact with process fluids.
To ensure swift, safe and professional device returns, please read the return procedures and
conditions on the Endress+Hauser website at www.services.endress.com/return-material.
8.7 Disposal
When disposing, separate and recycle the device components based on the materials.
8.8 Software history
Date Software version Software modifications Documentation
Operating Instructions
10.2009 01.00.zz Original software. BA385P/00/EN/10.09 71102503
BA00385P/00/EN/13.10 71125888
BA00385P/00/EN/15.11 71134887
BA00385P/00/EN/16.12 71157152
BA00385P/00/EN/17.12 71191314
BA00385P/00/EN/18.14 71241498

Endress+Hauser Cerabar M PMC51? Cerabar M PMP51 Specifications

General

Type	Cerabar M PMC51 / PMP51
Measuring Principle	Piezoresistive
Measured Variable	Pressure
Output Signal	4...20 mA HART, PROFIBUS PA, Foundation Fieldbus
Power Supply	10.5 to 45 V DC (HART), 9 to 32 V DC (PROFIBUS PA, FOUNDATION Fieldbus)
Process Temperature	-40 to +85 °C (-40 to +185 °F)
Ambient Temperature	-40 to +85 °C (-40 to +185 °F)
Housing Material	Aluminum, stainless steel
Diaphragm Material	Stainless steel
Process Connection	Threaded, flanged, sanitary
Protection Class	IP66
Material	Diaphragm: 316L
Approvals	ATEX, IECEx, SIL, FM, CSA
Communication	HART, PROFIBUS PA, Foundation Fieldbus