Endress+Hauser Cerabar M PMC51? Cerabar M PMP51 User Manual

Cerabar M Analog Table of contents
Endress+Hauser 3
Table of contents
1 Safety instructions . . . . . . . . . . . . . . . . 4
1.1 Designated use . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2 Installation, commissioning and operation . . . . . . . . 4
1.3 Operational and process safety . . . . . . . . . . . . . . . . . 4
1.4 Notes on safety conventions and icons . . . . . . . . . . . 5
2 Identification . . . . . . . . . . . . . . . . . . . . 6
2.1 Product identification . . . . . . . . . . . . . . . . . . . . . . . 6
2.2 Device designation . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.4 CE mark, Declaration of Conformity . . . . . . . . . . . . 9
2.5 Registered trademarks . . . . . . . . . . . . . . . . . . . . . . . 9
3 Installation . . . . . . . . . . . . . . . . . . . . . 10
3.1 Incoming acceptance, transport, storage . . . . . . . . . 10
3.2 Installation conditions . . . . . . . . . . . . . . . . . . . . . . 10
3.3 Installation instructions . . . . . . . . . . . . . . . . . . . . . 11
3.4 Closing the housing cover . . . . . . . . . . . . . . . . . . . 20
3.5 Mounting of the profile seal for universal process
mounting adapter . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.6 Post-installation check . . . . . . . . . . . . . . . . . . . . . . 20
4 Wiring . . . . . . . . . . . . . . . . . . . . . . . . 21
4.1 Connecting the device . . . . . . . . . . . . . . . . . . . . . . 21
4.2 Connecting the measuring unit . . . . . . . . . . . . . . . 23
4.3 Potential equalization . . . . . . . . . . . . . . . . . . . . . . 23
4.4 Overvoltage protection (optional) . . . . . . . . . . . . . . 24
4.5 Post-connection check . . . . . . . . . . . . . . . . . . . . . . 25
5 Operation . . . . . . . . . . . . . . . . . . . . . . 26
5.1 Position of operating elements . . . . . . . . . . . . . . . . 26
5.2 Using the device display (optional) . . . . . . . . . . . . . 27
6 Commissioning. . . . . . . . . . . . . . . . . . 29
6.1 Function check . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
6.2 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7 Maintenance. . . . . . . . . . . . . . . . . . . . 30
7.1 Cleaning instructions . . . . . . . . . . . . . . . . . . . . . . . 30
7.2 Exterior cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 30
8 Troubleshooting . . . . . . . . . . . . . . . . . 31
8.1 Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
8.2 Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
8.3 Response of output to errors . . . . . . . . . . . . . . . . . 31
8.4 Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
8.5 Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
8.6 Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
8.7 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
8.8 Software history . . . . . . . . . . . . . . . . . . . . . . . . . . 32
9 Technical data . . . . . . . . . . . . . . . . . . . 33
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Endress+Hauser Cerabar M PMC51? Cerabar M PMP51 Specifications

General

Type	Cerabar M PMC51 / PMP51
Measuring Principle	Piezoresistive
Measured Variable	Pressure
Output Signal	4...20 mA HART, PROFIBUS PA, Foundation Fieldbus
Power Supply	10.5 to 45 V DC (HART), 9 to 32 V DC (PROFIBUS PA, FOUNDATION Fieldbus)
Process Temperature	-40 to +85 °C (-40 to +185 °F)
Ambient Temperature	-40 to +85 °C (-40 to +185 °F)
Housing Material	Aluminum, stainless steel
Diaphragm Material	Stainless steel
Process Connection	Threaded, flanged, sanitary
Protection Class	IP66
Material	Diaphragm: 316L
Approvals	ATEX, IECEx, SIL, FM, CSA
Communication	HART, PROFIBUS PA, Foundation Fieldbus