Endress+Hauser cerabar S PMC Series - Page 57

Dimensions
Cerabar S
Further information on dimensions of the various versions is found in the Technical
Information TI 216P and 217P. The maximum installation height is given on the following
pages.
1) Example for PMC 731 with thread G½ external, DIN 16288; installation height 135 mm
PMC 731 – ❑❑❑❑❑❑❑❑
1 M❑
Code for process connection
0 - 10 bar
ENDRESS+HAUSER
CERABAR
Made in Germany
789689 Maulburg
D0
0
11
8
-
C
Order Code
Ser.-No.
P
P
min.
Pmax.
PROFIBUS-PA U = 9…32 V
Mat. IP 65
CERABAR
KEMA Nr. Ex-94.D.8801
Prüfer:
Datum:
EEx ia IIC T6,
C11,2nF,L 0,2mH
U 30 V, I 300 mA, P 1 W
EEx ia IIC T4,
ii
-40°C T 40°C
A
-40°C T 70°C
A
Cal./Adj.
ZS
A
27 AF
without display
112
104
98
M5
BA187Y63
Figure 9.1
Cerabar S PMC 731/PMP 731
Device Code for
Process connection
1)
Process connection Installation height A
in mm
PMC 731 1M/2M/5M Thread G ½ external, DIN 16288 135/135/135
PMC 731 1P/1R Thread G ½ external 135/135
PMC 731 1N/2N/1A/5G Threads ½ NPT external 135/135/135/135
PMC 731 1S Thread PF ½ external 135
PMC 731 1K Thread PT ½ external 135
PMC 731 1T Thread M 20x1.5 external 135
PMC 731 AL/AH Hygienic Connections DIN 11851 163
PMC 731 DL Hygienic Connection Clamp 163
PMC 731 LL Hygienic Connection Varivent 163
PMC 731 KL Hygienic Connection DRD flange 163
PMC 731 AG Threaded connection G 1½ 187
PMC 731 AR Threaded connection G 2 187
PMC 731 BF Threaded connection 1½ NPT 187
PMC 731 BR Threaded connection 2 NPT 187
PMC 731 XK Threaded connection M 44x1.25 187
PMC 731 EK Flange DIN 2501, DN 50 163
PMC 731 KJ/KK Flange ANSI B. 16.5, DN 2" 163
PMC 731 RI RF flange 157
Table 9.1
Installation height A of the
different versions of PMC 731
(see also TI 216P)
Device Code for
Process connection
1)
Process connection Installation height A
in mm
PMP 731 1F Thread G ½ external,
flush-mounted diaphragm
132
PMP 731 1M Thread G ½ external,
internal diaphragm
160
PMP 731 1G Thread ½ NPT external 160
PMP 731 1S Thread PF ½ external 160
PMP 731 1K Thread PT ½ external 160
PMP 731 1T Thread M 20x1.5 external 160
Table 9.2
Installation height A of the
different versions of PMP 731
(see also TI 216P)
Cerabar S 9 Technical Data
Endress+Hauser 57