Endress+Hauser cerabar S PMC Series - Page 58

1) Example for PMC 631 with diaphragm seal DIN 11851, DN 25;
installation height 188 mm
PMC 631 – ❑❑❑❑❑❑❑❑
A B
Code for process connection
Device Code for
Process connection
1)
Process connection Installation height A
in mm
PMC 631 AB/AG/AH/AL Diaphragm seal DIN 11851 188/189/187/182
PMC 631 DG/DL Clamp 182/187
PMC 631 EB/EG/EL SMS 185/182/187
PMC 631 FB/FG/FL RJT Adapter 190/190/190
PMC 631 GB/GG/GL ISS Adapter 192/192/192
PMC 631 KL DRD flange 203
PMC 631 LL Varivent 197
PMC 631 PH/PL Pipe diaphragm seal DIN 11851 200/205
PMC 631 SA/SB/SG/SL Clamp pipe diaphragm seal 185/185/222/227
Table 9.3
Installation height A of the
different versions of PMC 631
(see also TI 217P)
Device Code for
Process connection
1)
Process connection Installation height A
in mm
PMP 635 AF/AG/AR Threaded connection DIN ISO 228/1 200/201/206
PMP 635 BF/BG/BR Threaded connection ANS I B 1.201 203/201/201
PMP 635 CA Seperator with G1/2
DIN 16 288, form B
206
PMP 635 DA Seperator with ½ NPT ANSI B 1.201 206
PMP 635 EC/ED/EF Flanges DIN 2501, DN 25 224/224/224
PMP 635 EK / EM / EN / EP Flanges DIN 2501, DN 50 224/224/224/256
PMP 635 EU Flange DIN 2501, DN 80 228
PMP 635 FK/GK/JK Flanges with extension
DIN 2501, DN 50
224/224/224
PMP 635 FU/GU/JU Flanges with Tubus
DIN 2501, DN 80
228/228/228
PMP 635 KD/KE/KF Flanges ANSI B 16.5, 1" 224/235/241
PMP 635 KJ/KK/KL/KM/KN Flanges ANSI B 16.5, 2" 225/228/232/244/257
PMP 635 KU/KV Flanges ANSI B 16.5, 3" 230/235
PMP 635 KW/KX Flanges ANSI B 16.5, 4" 230/238
PMP 635 LJ/MJ/NJ Flanges 2" with extension
ANSI B 16.5
225/225/225
PMP 635 LU/MU/NU/PU/MV/ PV Flanges 3" with extension
ANSI B 16.5
230/230/230/230/235/235
PMP 635 LW/MW/NW Flanges 4" with extension Tubus
ANSI B 16.5
230/230/230
Table 9.4
Installation height A of the
different versions of PMP 635,
(see also TI 217P)
0 - 10 bar
A
BA187Y65
Figure 9.2
left:
Cerabar S PMP 635
with flange or thread
right:
Cerabar S PMC 631
with dairy thread
0 - 10 bar
A
BA187Y64
9 Technical Data Cerabar S
58 Endress+Hauser