What does error code F841 mean on Endress+Hauser Deltabar FMD71 and how to solve it?
The error code F841 on your Endress+Hauser Measuring Instruments indicates overpressure or low pressure, or a defective sensor module. To solve this, check the pressure value.
What does error code S841 mean on Endress+Hauser Deltabar FMD71 Measuring Instruments?
The error code S841 on your Endress+Hauser Measuring Instruments indicates overpressure or low pressure, or a defective sensor module. To address this, check the pressure value.
What does error code F945 mean on Endress+Hauser Measuring Instruments and how to resolve it?
The error code F945 on your Endress+Hauser Measuring Instruments indicates that the configured overpressure or underpressure limit of sensor module LP is exceeded, or the sensor module LP is defective. To resolve this, check the pressure value or change the pressure limit value.
What does error code S945 mean on Endress+Hauser Measuring Instruments and how can I resolve it?
The error code S945 on your Endress+Hauser Measuring Instruments indicates that the configured overpressure or underpressure limit of sensor module LP is exceeded or the sensor module LP is defective. To fix this, check the pressure value or change the pressure limit value.
What does error code C824 mean on Endress+Hauser Measuring Instruments and how to troubleshoot it?
The error code C824 on your Endress+Hauser Measuring Instruments can be caused by electromagnetic effects outside the permitted range or overpressure or low pressure. To troubleshoot this, check the pressure value, restart the device, or perform a reset.
What does error code S140 mean on Endress+Hauser Deltabar FMD71 and how to resolve it?
The error code S140 on your Endress+Hauser Measuring Instruments can be caused by overpressure or low pressure, electromagnetic effects outside the permitted range, or a defective sensor module. To resolve this, check the process pressure and the pressure value.
General| Device Type | Differential Pressure Transmitter |
|---|---|
| Measuring Principle | Piezoresistive |
| Output Signal | 4 to 20 mA HART, PROFIBUS PA, FOUNDATION Fieldbus |
| Power Supply | 10.5 to 45 V DC |
| Accuracy | ±0.065% of span |
| Process Temperature | -40 to 150°C (-40 to 302°F) |
| Ambient Temperature | -40 to 85°C (-40 to 185°F) |
| Process Connection | Thread, flange, hygienic connections |
| Housing Material | Aluminum |
| Diaphragm Material | 316L Stainless Steel |
| Communication | HART, PROFIBUS PA, FOUNDATION Fieldbus |
| Approvals | ATEX, IECEx |
| Protection Class | IP67 |
| Process Pressure (Absolute) | Up to 40 bar |
| Application | Level, flow, and differential pressure measurement in liquids, gases, and vapors |
To Next Page