Endress+Hauser Deltabar FMD72 - Basic Safety Instructions; Staff Requirements; Designated Use

Incoming acceptance and product identification Deltabar FMD72
10 Endress+Hauser
A0015502
A0016055
Are the CD-ROM (product documentation) and documentation present?
If required (see nameplate): Are the safety instructions (XA) present?
If one of these conditions is not met, please contact your Endress+Hauser sales office.
4.2 Product identification
The following options are available for identification of the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
•
Enter serial numbers from nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): All information about the measuring device is displayed.
For an overview of the technical documentation provided, enter the serial number from the
nameplates in the W@M Device Viewer (www.endress.com/deviceviewer)
4.2.1 Nameplate
ex works SW:
Dev.Rev.:
250002755-C
Ext. order code:
Ser. no.:
U=
Span
P
MWP
Order code:
Made in Germany, D-79689 Maulburg
L=
1
2
3
A0016056
1
Order code
2 Serial number (Ser. no.)
3 Extended order code (Ext. ord. cd.)