Product description Deltabar FMD72
8 Endress+Hauser
Repair
To ensure continued operational safety and reliability,
►
Carry out repairs on the device only if they are expressly permitted.
►
Observe federal/national regulations pertaining to repair of an electrical device.
►
Use original spare parts and accessories from Endress+Hauser only.
Hazardous area
To eliminate a danger for persons or for the facility when the device is used in the hazardous
area (e.g. explosion protection, pressure vessel safety):
►
Based on the nameplate, check whether the ordered device is permitted for the intended use
in the hazardous area.
►
Observe the specifications in the separate supplementary documentation that is an integral
part of these Instructions.
2.5 Product safety
This measuring device is designed in accordance with good engineering practice to meet state-
of-the- art safety requirements, has been tested, and left the factory in a condition in which they
are safe to operate.
It fulfills general safety requirements and legal requirements. It also conforms to the EC directives
listed in the device-specific EC declaration of conformity. Endress+Hauser confirms this fact by
applying the CE mark.
3 Product description
See the Operating Instructions BA01044P on the CD-ROM provided.
4 Incoming acceptance and product identification
4.1 Incoming acceptance
A0015502
A0016870
Is the order code on the delivery note (1) identical to the order code on the
product sticker (2)?
To Next Page
Loading...
