Operation Micropilot S FMR533 4 to 20 mA HART
38 Endress+Hauser
5.5.3 Operation with Endress+Hauser operating program
FieldCare is an Endress+Hauser asset management tool based on FDT technology. With FieldCare,
you can configure all Endress+Hauser devices as well as devices from other manufacturers that
support the FDT standard. Hardware and software requirements you can find on the internet:
www.endress.com È select your country È search: FieldCare È FieldCare È Technical Data.
FieldCare supports the following functions:
• Configuration of transmitter in online operation
• Signal analysis via envelope curve
• Tank linearization
• Loading and saving device data (upload/download)
• Documentation of the measuring point
Connection options:
• HART via Commubox FXA195 and the USB port on a computer
• Commubox FXA291 with ToF Adapter FXA291 (USB) via service interface
Menu-guided commissioning
MicropilotM-en-305
To Next Page
Loading...
