Micropilot S FMR533 4 to 20 mA HART Commissioning
Endress+Hauser 61
6.6
Basic Setup with the Endress+Hauser operating program
To carry out the basic setup with the operating program, proceed as follows:
• Start the operating program and establish a connection.
• Select the "basic setup" function group in the navigation bar.
The following display appears on the screen:
Basic Setup step 1/5:
•Status image
• Enter the measuring point description (TAG number).
MicropilotS-en-001
!
Note!
• Each parameter that is changed must be confirmed with the return key!!
•The "Next" button moves you to the next screen display:
To Next Page
Loading...
