Endress+Hauser HART Micropilot S FMR533 - Page 82

Technical data Micropilot S FMR533 4 to 20 mA HART
82 Endress+Hauser
10.1.7 Operating conditions: Process
Process temperature range -40 °C to +200 °C
Process pressure limits 0 to 40 bar (Option 64 bar)
Dielectric constant • In a stilling well:
εr ≥ 1.4
• In free space:
εr ≥ 1.9
10.1.8 Mechanical construction
Weight Approx 6 kg + weight of flange
Material Refer to TI00344F/00/EN, chapter "Material (not in contact with process)" and "Material (in
contact with process)".
10.1.9 Certificates and approvals
CE approval The measuring system meets the legal requirements of the EC-guidelines.
Endress+Hauser confirms the device passing the required tests by attaching the CE-mark.
RF approvals R&TTE 1999/5/EG, FCC CRF 47, part 15
Custody type approval All aspects of OIML R85 are fulfilled.
Overspill protection WHG, see ZE00243F/00/DE.
External standards and
guidelines
To conception and development for Micropilot S have been followed the external standards and
guidelines:
EN 60529
Protection class of housing (IP-code)
EN 61010
Safety regulations for electrical devices for measurement, control, regulation, and laboratory use.
EN 61326
Emissions (equipment class B), compatibility (appendix A – industrial area)
NAMUR
Standards committee for measurement and control in the chemical industry
API (American Petroleum Institute)
Particularly "Manual of Petroleum Measurement Stadards".
OIML R85 (Organisation Internationale de Métrologie Légale)
Ex approval XA00081F-B
Safety Instructions for Micropilot S FMR530, FMR532, FMR533
(T12 / EEx ia IIC T6…T1)
PTB 00 ATEX 2067 X, Equipment marking: (II 1/2 G)
Marine certificate GL (Germanischer Lloyd)