Endress+Hauser iTEMP TMT71 - Special Connection Instructions

iTEMP TMT71, TMT72 Electrical connection
Endress+Hauser 23
1.
2.
3.
1
2
3
A0037914
 12 Fitting the CDI connector of the configuration kit for configuration, visualization and maintenance
of the head transmitter via PC and configuration software
1 Configuration kit, e.g. TXU10 with USB connection
2 CDI connector
3 Installed head transmitter with CDI interface
5.5 Special connection instructions
Shielding and grounding
The specifications of the HART
®
FieldComm Group must be observed when installing a HART®
transmitter.