Endress+Hauser iTEMP TMT71 - 4 Installation; Installation Conditions

iTEMP TMT71, TMT72 Installation
Endress+Hauser 11
4 Installation
4.1 Installation conditions
4.1.1 Dimensions
24.1
(0.95)
33 (1.3)
!
44 (1.73)
!
7 (0.28)
!
5 (0.2)
B
C
A
A0036303
 3 Head transmitter version with screw terminals. Dimensions in mm (in)
A Spring travel L ≥ 5 mm (not for US - M4 securing screws)
B Mounting elements for attachable measured value display
C Interface for contacting measured value display
The same dimensions apply to the version with push-in terminals. Exception: housing
height H = 30 mm (1.18 in).