Endress+Hauser Levelflex FMP53 - Product identification

Levelflex FMP53 FOUNDATION Fieldbus Mounting
Endress+Hauser 15
3 m (9 ft) / 6 m (19 ft)
r
min
= 50 mm (2")
6 Nm (4.42 lbf ft)
A0015103
6.2.3 Turning the transmitter housing
To provide easier access to the connection compartment or display module, the transmitter
housing can be turned:
max.350°
8mm
8mm
A0013713
1. Unscrew the securing screw using an open-ended wrench.
2. Rotate the housing in the desired direction.
3. Tighten the securing screw (1,5 Nm for plastics housing; 2,5 Nm for aluminium or
stainless steel housing).