Endress+Hauser Levelflex M FMP40 - Ordering Information

Levelflex M FMP40
58 Endress+Hauser
Ordering information
Levelflex M FMP40 Device selection
L00-FMP4xxxx-16-00-00-en-003
The metallic uninsulated probes are only insulated in the area of the bushing. Thus there is no danger of
electrostatic charging. The PA-coated rope has been tested and there is no dangerous electrostatic charging.
As a result, there are no restrictions on use in Ex-areas for any of the probes.
Note!
For orders with a display, the housing cover is delivered with an inspection glass. For orders without a display,
a dummy cover is delivered.
Exception: For orders with the ATEX II 1/2 D dust ignition-proof certificate, a dummy cover is always
delivered, even for orders with a built-in display.
F12+F23
2)
F12+F23
2)
F12+F23
2)
T12 T12 T12 T12
PA PA PA PA PA
FF FF FF FF FF
Ex em
Ex ia
IS
Ex d
XP
Certificate
Electronic/
Communication
Housing
Ex-free
area
Dust-Ex
DIP
2 Wire
4-20 mA/
HART
1)
2 Wire
4-20 mA/
HART
1)
2 Wire
4-20 mA/
HART
1)
2 Wire
4-20 mA/
HART
1)
2 Wire
4-20 mA/
HART
1)
4 Wire
4-20 mA/
HART
4 Wire
4-20 mA/
HART
2)
Instead of the F12 aluminum housing the F23 stainless steel housing can also be supplied to all 2 wire electronics.
1)
Also valid for the version “K” 2 Wire, 4 - 20 mA HART, interface measurement.
Temperature
(depending on O-ring)
V Viton, -30 °C to +150 °C
E EPDM, -40 °C to +120 °C
K Kalrez, -5 °C to +150 °C
1)
1) Recommended for steam applications.
Pressure (all types) -1 to 40 bar
Wetted parts Rope probes:
Flanges: 316L (1.4404 )
Process connection: 316L (1.4435), 1.4462
Rope: 316L (1.4401)
Weight: 316L (1.4435)
Rod probes:
Flanges: 316L (1.4404)
Process connection: 316L (1.4435), 1.4462
Rod: 316L (1.4404 / 1.4435)
Coax pipe: 316L (1.4435)