Endress+Hauser Levelflex M FMP40 - Extension Rod (Centering)

Levelflex M FMP40
Endress+Hauser 67
Extension rod (Centering)
L00-FMP4xxxx-17-00-00-en-025
010 Approval
A Non-hazardous area
M FM DIP Cl.II Div.1 Gr. E-G N.I., zone 21, 22
P CSA DIP Cl.II Div.1 Gr. G + Coal dust, N.I.
S FM Cl.I, II, III Div.1 Gr. A-G, N.I., zone 0, 1, 2, 20, 21, 22
U CSA Cl.I, II, III Div.1 Gr. A-G N.I., zone 0, 1, 2
1ATEX II 1G
2AREX II 1D
020 Extension rod; Nozzle Height
1 115mm; 150-250mm / 6-10"
2 215mm; 250-350mm / 10-14"
3 315mm; 350-450mm / 14-18"
4 415mm; 450-550mm / 14-22"
9 Special version, TSP-No. to be spec.
030 Center washer
A not selected
B DN40 / 1-1/2", inside-d.= 40-45mm, PPS
C DN50 /2", inside-d.= 50-57mm, PPS
D DN80 / 3", inside-d.= 80-85mm, PPS
E DN80 / 3", inside-d.= 76-78mm, PPS
G DN100 / 4", inside-d.= 100-110mm, PPS
H DN150 / 6", inside-d.= 152-164mm, PPS
J DN200 / 8", inside-d.= 210-215mm, PPS
K DN250 / 10", inside-d.= 253-269mm, PPS
Y Special version, TSP-No. to be spec.
HMP40- Complete product designation
#
DN50 (2")
DN80 (3")
DN150 (6")
DN200 (8")
DN250 (10")
centering disk
at PPS - GF40
For DN200 and DN250
in combination
with horn adapter
Extension rod
Not for ¾" probe.
For rod probe on request.
nozzle
height
Keep metal tube
at minimum length!