Endress+Hauser Liquicap T FMI21 - Weight; Material; Fitted Electrodes

Liquicap T FMI21
Endress+Hauser 11
Weight Rod 1 m length
FMI21 = 600 g
Material Probe rods
• Rod: 1.4404/316L - (use in water-based media, alkalis ...)
Optional: carbon fibre CFC/rod retainer silver (Ag) - (use in acids e.g. hydrochloric acid)
• Insulation: PP
• Spacer: PP
• Probe shortening set: PP
Housing F16
• Housing: PBT-FR
•Cover: PBT
• Cover with sight glass: PA
• Cable gland: PA
• Adapter: PBT
• Dummy plug: PBT
Process connections
• G 1½ A (PPS, DIN ISO 228/l)
• NPT 1½ (PPS, ANSI B 1.20.1)
Seals
• Seal between housing and process connection: EPDM
• Seal for plastic housing cover F16: EPDM
• Sealing ring for process connection G 1½ A: elastomer fibre asbestos-free (resistant to oils,
solvents, steam, weak acids and alkalis)
Fitted electrodes Rod probe with two rods
• Rod diameter without insulation: 4 mm
• Maximum rod length: 2500 mm
• Minimum rod length: 150 mm
• Insulation thickness: 0.5 mm
• Extraction forces (parallel probe rod): 1000 N
• Lateral loading capacity: 2 Nm