Endress+Hauser Liquicap T FMI21 - Certificates and Approvals; CE Mark; Overfill Protection; Other Standards and Guidelines

Liquicap T FMI21
Endress+Hauser 13
Certificates and approvals
CE mark The Liquicap T is in conformity with the statutory requirements of the EC Directives. Endress+Hauser confirms
that the device has been tested successfully by applying the CE mark.
CSA/US; General Purpose (GP) Kanada, USA
Overfill protection Approvals
• German Water Resources Law (WHG) - see commissioning notes in ZE263F (Z. 65.xx - xxx)
Other standards and
guidelines
• Low Voltage Directive (73/23/EEC)
• DIN EN 61010 Part 1, 2001
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and Laboratory
Procedures.
Part 1: General Requirements
• CAN/CSA-C22.2 No. 1010.1-92
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use;
Part 1: General Requirements (Includes Amendment 1)
• UL Std No. 61010C-1
Process Control Equipment; Part 1: General Requirements
• EN 61326
Electrical Equipment for Measurement, Control and Laboratory Use
EMC Requirements
• EN 50021
Electrical Apparatus for Potentially Explosive Atmospheres
Specification for Electrical Apparatus with Type of Protection "N"
Ex approval ATEXII3GEExnAIICT6
All explosion protection data are given in a separate documentation (see: Documentation) which is available
upon request.
Type of protection EEx nA IIC T6 (non-sparking equipment)